SMART SELECTION

SUNSYS P100TR

SUNSYS P100TR

100 kW three-phase PV inverter

The solution for

Installations in large commercial buildings

The best, high-efficiency performance

The SUNSYS P100TR inverter is the ideal solution for photovoltaic plants that are connected to a low-voltage network with 100 kW power.

The modular architecture with a three-level converter and the DPC function allow improved energy production at low levels of sunlight.

SUNSYS P100TR is compatible with all photovoltaic module technologies and with a wide range of string configurations.

The Sunsys IFB and Sunguard supervision system facilitate the monitoring and maintenance of the photovoltaic installation.

The benefits of the “Dynamic power Control” system

Increased efficiency The DPC system optimizes the efficiency of your installation, particularly for partial loads. The inverter starts to produce electricity at low levels of sunlight.

Increased lifetime Thanks to the DPC, only the modules required for energy production are operational. In addition, use of the power modules is verified in a cyclical manner to share the load time. The duration of operation of a module is thus optimized, increasing the useful life of the inverter.

Better availability If one of the inverter power modules stops (due to a fault), the system will automatically reconfigure in order to use the remaining modules as best possible, and to continue supplying the maximum possible amount of energy.

Standard and option features
Technical Data
Input (DC)
Maximum PV power (STC module conditions) 120000 W
Rated voltage 550 VDC
MPPT voltage range 450 to 850 VDC
Number of independent MPPTs 3
Maximum input current 80 A x 3
Output (AC)
Power rating 100000 W
Rated voltage 400 Vrms(1) 3ph
Rated frequency 50 Hz(1)
Rated current 144 Arms
Total harmonic distortion of current < 3 %
Power factor range 0.8 to 1(2)
Topology 50 Hz output transformer
Level of efficiency
Maximum efficiency 97 %
EU efficiency 96 %
General data
Cooling system Smart cooling
Environmental degree of protection (according to EN 62109) IP20
Operating temperature -5 to +60 °C
Sound emission < 64 dB 1 m from inverter
Dimensions (L x D x H) 1200 x 795 x 1400 mm
Weight 770 kg

(1) The accepted tolerance depends on the country of installation and the regulations in force.

(2) Setup according to the requirements of the electricity supplier.

On the same subject