UPS SOCOMEC DELPHYS GP - Green Power 2.0 range

UPS SOCOMEC DELPHYS GP - Green Power 2.0 range

SMART SELECTION

from 160 to 800 kVA/kW

Ultra high energy efficiency and maximum power

availability up to 4 MW

The solution for

Advantages

Energy Saving: high efficiency without compromise

Full-rated power: kW=kVA

Significant cost savings (TCO)

Extended battery life and performance:

Parallel systems

Standard electrical features

Electrical options

Standard communication features

Communication options

Remote monitoring service

Data centres

Telecommunications

Service sector

IT Networks/ Infrastructures

Offers the highest efficiency in the market using VFI – Double Conversion Mode, the only UPS working-mode that assures total load protection against all mains quality problems.

Ultra high efficiency output independently tested and verified by an international certification organization in a wide range of load and voltage operating condition.

Ultra high efficiency in VFI mode is provided by an innovative topology (3-Level technology) that has been developed for all the Green Power UPS ranges.

No power downgrading when supplying the latest generation of servers (leading or unity power factor).

Real full power, according to IEC 62040: kW=kVA (unity power factor design) means 25% more active power available compared to legacy UPS.

Suitable also for leading power factor loads down to 0.9 without apparent derating.

Maximum energy saving thanks to 96% efficiency in true double conversion mode: 50% saving on energy losses compared to legacy UPS gives significant savings in energy bill.

Up to 99% efficiency with FAST ECOMODE

UPS “self-paying” with energy saving.

Energy Saver mode for global efficiency improvement on parallel systems.

kW=kVA means maximum power available with the same UPS rating: no overdesign cost and therefore less €/kW.

Upstream infrastructure cost optimization (sources and distribution), thanks to high performance IGBT rectifier.

Long life battery,

EBS (Expert Battery System) charging management improves battery service life

BHC INTERACTIVE: Accurate battery monitoring with UPS interactivity for even more prolonged service life

Standard and option features

To fulfil the most demanding needs for power supply availability, flexibility and the installation to be upgraded.

Modular parallel configurations up to 4 MW, development without constraint.

Distributed or centralized bypass flexibility to ensure a perfect compatibility with the electrical infrastructure.

Twin channel architecture with Static Transfer Systems.

Distributed or shared battery for energy storage optimization on parallel systems.

Dual input mains.

Integrated maintenance bypass.

Backfeed protection: detection circuit.

EBS (Expert Battery System) for battery management.

Redundant cooling.

Battery temperature sensor.

External maintanance bypass.

Extended battery charger capability.

Shared battery.

Flywheel compatible.

Galvanic isolation transformer.

Backfeed isolation device.

ACS synchronisation system.

BHC Interactive.

Fast EcoMode.

User-friendly multilingual interface with graphic display.

2 slots for communication options.

RS232 serial port for modem.

Ethernet connection (WEB/SNMP/MODBUS TCP/email).

USB port for event log access.

Advanced server shutdown options for stand-alone and virtual servers.

4 additional slots for communication options.

ADC interface (configurable voltage-free contacts).

MODBUS/JBUS RTU.

BACnet/IP interface

SMS alert.

LINK-UPS, remote monitoring service that connects your UPS to your Critical Power specialist 24 / 7.

Technical Data

Sn (kVA)	160	200	250	320	400	500	600	800
Pn [kW]	160	200	250	320	400	500	600	500
Input / output	3/3
Parallel configuration	up to 4 MW

Output
Rated voltage	3ph + N 400 V
Voltage tolerance static load	static load ±1% dynamic load in accordance with VFI-SS-111
Rated frequency	50 / 60 Hz
Frequency tolerance	± 2% (configurable for GenSet compatibility)
Total output voltage distortion - linear load	ThdU < 1.5%
Total output voltage distortion - non-linear load (lEC 62043-3)	ThdU < 3%
Short circuit current	up to 3.4 x In
Overload	125% for 10 minutes, 150% for 1 minute (1)
Crest factor	3:1

Bypass
Rated voltage	rated output voltage
Voltage tolerance	± 15% (configurable with from 10% to 20%)
Rated frequency	50/60 Hz
Frequency tolerance	± 2% (configurable for GenSet compatibility)

Efficiency
Online mode @ 40 % of load	up to 96%
Online mode @ 75 % of load	up to 96%
Online mode @ 100 % of load	up to 96%
Fast EcoMode	up to 99%

Environment
Operating ambient temperature	from 10 °C up to +40 °C (1) (from 15 °C to 25 °C for maximum battery life)
Relative humidity	0% - 95% without condensation
Maximum altitude	1000 m without declassing (max. 3000 m)
Acoustic level at 1 m (ISO 3746)	<65 dBA	<67 dBA	<70 dBA	<68 dBA	<70 dBA	<72 dBA	<74 dBA

UPS Cabinet
Dimensions (W x D x H)	700 x 800 x 1930 mm		1000x 950x 1930 mm	1400 x 800 x 1930 mm		1600x 950x 1930 mm	3700 x 950 x 2055 mm
Weight	470 kg	490 kg	850 kg	980 kg	1000 kg	1500 kg	3400 kg
Degree of protection	IP 20 (other IP as option)
Colours	cabinet: RAL 7012, door: silver grey

Standards
Safety	EN 62040-1, EN 60950-1
EMC	EN62040-2
Performance	EN62040-3 (VFI-SS-111)
Product declaration	CE

(1) Conditions apply.

(2) With input THDV < 1%

Rated voltage

Voltage tolerances

200 V to 480 V (1)

Rated frequency

Frequency tolerance

Power factor/THDI

> 0.99 / < 2.5%(2)