from 1000 to 3000 VA
Solutions for supplying MV/LV transformer cabins
The solution for
Control devices
Electric lines
Advantages
High protection and high availability
Range of compact UPS systems available in 1000, 2000 and 3000 VA models with on-line double conversion technology (VFI).
Permanent regulation of the output voltage and frequency. This technology is compatible with all IT and industrial applications and operating environments, installations with generator sets included.
Wide tolerance on input voltage ensures that switchovers to battery mode are infrequent, significantly prolonging battery lifetime.
The automatic bypass device switches over in zero time in the event of overload or failure, guaranteeing uninterrupted services.
Tropicalization and anti-corrosion protection for electrical boards.
Straightforward to install and easy to use
Shipped ready for connection with internal batteries connected and charged.
With the manual bypass option, it is easy to install without any special plant engineering preparation, as it is equipped with built-in thermal protection.
The LED monitoring/control panel and a buzzer make the equipment extremely easy and intuitive to use. The graphic indicating the power distribution path shows at a glance whether or not the system is working as it should.
Battery efficiency can be tested via the control panel or using dedicated software.
Operating efficiency and versatility
Suitable for protecting critical devices in the industrial field.
The standard equipment and communication accessories have been specially designed to satisfy the typical needs of installation or use in transformer cabins.
n situations where automatic power management procedures are required, the communication software can be used to programme scheduled start-up and shutdown times.
Restarting the UPS from the battery to power the DG before closing the main isolator.
Standard and option features
Standard communication features
LOCAL VIEW: ideal point-to-point software for UPS monitoring and shutdown of Windows®, Linux and MAC OS X® operating systems (standard for all models).
MODBUS/JBUS RTU (RS 232).
Communication options
NET VISION: professional network adapter for monitoring and controlling UPS units from a remote location (option for all models).
Dry contact interface.
Technical Data
Manual bypass (option)
Specially designed for ITYS ES, the manual bypass option enables:
simplified installation: connection to the system is made with industrial grade terminals, while connection to the UPS is via the pre-wired plug and socket supplied.
easy maintenance and uninterrupted operation: thanks to the manual bypass isolator it is possible to service or replace the UPS while maintaining the power supply to the devices downstream in complete safety for the operator. This operation has been specially devised to be simple to carry out, even in an emergency.
ncreased level of equipment immunity to surge voltages, typical for this type of application, thanks to suitable surge arrestors included in addition to standard UPS protection.
Programmable clean contacts board (option)
Dedicated interface with clean contacts, can be installed on the rear slot: gives the status of the UPS with five potential-free contacts and provides an input for remote emergency stopping (EPO).
| |
ITYS ES - UPS |
| Item Code |
ITYS ES 1k0 |
ITYS ES 2k0 |
ITYS ES 3k0 |
| Sn |
1000 VA |
2000 VA |
3000 VA |
| Pn |
700 W |
1400 W |
2100 W |
| Input / output |
1/1 |
| Input |
| Rated voltage |
230 V |
| Voltage tolerance |
160-300 V (up to 110 V at 60% of the load) |
| Rated frequency |
50/60 Hz |
| Power factor |
0.98 |
| Output |
| Rated voltage |
230 V (can be set to 220/240 V) |
| Voltage tolerance |
± 1.5% |
| Rated frequency |
range of synchronism 46-54 Hz |
| Frequency stability (for 50 Hz) |
50 Hz ± 0.2 in battery mode |
| Overload |
up to 150 % for 30 seconds |
| Crest factor |
3:1 |
| Connections |
4 x IEC 320 |
6 x IEC 320 |
4 x IEC 320
+ terminals |
| Batteries |
| Type |
sealed lead-acid maintenance free - expected lifetime 3-5 years |
| Back-up time at 75% of the rated load(1) |
10 min |
17 min |
9 min |
| Sized for a back-up time of |
115 min @ 50 W |
154 min @ 100 W |
216 min @ 150 W |
| Back-up time(2) + switching back on |
60 min @ 50 W |
60 min @ 100 W |
60 min @ 150 W |
| Battery test |
• |
• |
• |
| Communication |
| Interfaces |
RS232 (DB9 connector) MODBUS protocol |
| Communication slots |
• |
• |
• |
| Modem/ADSL protection |
• |
• |
• |
| Efficiency |
| Online mode |
up to 90 % |
| Environment |
| Ambient service temperature |
0 °C to +40 °C (15 °C to 25 °C for maximum battery lifetime) |
| Relative humidity |
0 to 90% non-condensing |
| Maximum altitude |
1000 m without de-rating (3000 m max) |
| Noise level at 1 m |
45 dBA |
| UPS cabinet |
| Dimensions W x D x H |
145 x 400 x 220 mm |
192 x 460 x 350 mm |
| Weight |
14 kg |
34 kg |
34/16 kg |
| Degree of protection |
IP20 (according to IEC 60529) |
| Colours |
Cabinet 430C, front 431C |
| Standards |
| Safety |
EN 62040-1 |
| EMC |
EN 62040-2 Equipped with input filters to suppress atmospheric interference |
| Product certification |
CE |
| |
ITYS ES - Manual bypass(3) |
| Sn |
1000 VA |
2000 VA |
3000 VA |
| Input |
| Type of terminals |
CBD6 |
| Wire size |
6 mm2 max |
| Bypass |
| Switching positions |
1: UPS - 2: MAINS |
| Switching time |
6 ms max |
| Load output |
| Type of terminals |
CBD6 |
| Wire size |
6 mm2 max |
| UPS supply output |
| Type of socket |
IEC 320 10 A |
IEC 320 16 A |
| Surge arrestors (on request) |
| Type |
“L” in compliance with CEI EN 61643-11 |
| L/N pulse current |
40 kA (8/20) max |
| VAC N/GND |
255 V max |
| VAC L/N |
320 V max |